Nom de la machine: Patagonia (deuxième génération)
Matériel (Acheté en Janvier 2011 chez E-Network):
Matériel recyclé:
Contrôleur SATA2 3G buggé → retour SAV planifié pour Avril 2011
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:02.0 Display controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b4) 00:1c.7 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 8 (rev b4) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1) 02:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7300 GT] (rev a1) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 04:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 10) 05:00.0 Mass storage controller: HighPoint Technologies, Inc. HPT366/368/370/370A/372/372N (rev 03) 05:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11) 05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) 05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) 05:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 06:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
[ 0.000000] Linux version 2.6.37-patagonia (root@patagonia) (gcc version 4.3.5 (Debian 4.3.5-4) ) #4 SMP PREEMPT Fri Jan 28 21:29:05 CET 2011 [ 0.000000] Command line: root=/dev/sda ro console=tty0 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bcfd0000 (usable) [ 0.000000] BIOS-e820: 00000000bcfd0000 - 00000000bcfd3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bcfd3000 - 00000000bcfe0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bcfe0000 - 00000000bd000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: H67A-UD3H/H67A-UD3H, BIOS F4 11/02/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 3 base 0BD800000 mask FFF800000 uncachable [ 0.000000] 4 base 100000000 mask F00000000 write-back [ 0.000000] 5 base 200000000 mask FC0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bd800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbcfd0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5550] f5550 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bcfd0000 [ 0.000000] 0000000000 - 00bce00000 page 2M [ 0.000000] 00bce00000 - 00bcfd0000 page 4k [ 0.000000] kernel direct mapping tables up to bcfd0000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000 [ 0.000000] 0100000000 - 023fe00000 page 2M [ 0.000000] kernel direct mapping tables up to 23fe00000 @ bcfc6000-bcfd0000 [ 0.000000] ACPI: RSDP 00000000000f6c70 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000bcfd3040 0004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000bcfd3100 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000bcfd31c0 046A6 (v01 GBT GBTUACPI 00001000 MSFT 04000000) [ 0.000000] ACPI: FACS 00000000bcfd0000 00040 [ 0.000000] ACPI: HPET 00000000bcfd79c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000bcfd7a40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: ASPT 00000000bcfd7b00 00034 (v07 GBT PerfTune 312E3042 UTBG 01010101) [ 0.000000] ACPI: SSPT 00000000bcfd7b40 02390 (v01 GBT SsptHead 312E3042 UTBG 01010101) [ 0.000000] ACPI: EUDS 00000000bcfd9ed0 000C0 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: MATS 00000000bcfd9f90 00034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000bcfd9ff0 0097A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000bcfd78c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000bcfda980 03E74 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff8800ac000000-ffff8800b2ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0023fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bcfd0 [ 0.000000] 0: 0x00100000 -> 0x0023fe00 [ 0.000000] On node 0 totalpages: 2084189 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 755720 pages, LIFO batch:31 [ 0.000000] Normal zone: 17913 pages used for memmap [ 0.000000] Normal zone: 1292295 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bcfd0000 - 00000000bcfd3000 [ 0.000000] PM: Registered nosave memory: 00000000bcfd3000 - 00000000bcfe0000 [ 0.000000] PM: Registered nosave memory: 00000000bcfe0000 - 00000000bd000000 [ 0.000000] PM: Registered nosave memory: 00000000bd000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bd000000 (gap: bd000000:33000000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff8800bcc00000 s73600 r8192 d20608 u262144 [ 0.000000] pcpu-alloc: s73600 r8192 d20608 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2051934 [ 0.000000] Kernel command line: root=/dev/sda ro console=tty0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 8136172k/9435136k available (3893k kernel code, 1098380k absent, 200584k reserved, 1623k data, 436k init) [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] NR_IRQS:512 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3395.831 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6791.66 BogoMIPS (lpj=13583324) [ 0.000186] pid_max: default: 32768 minimum: 301 [ 0.000310] Mount-cache hash table entries: 256 [ 0.000455] CPU: Physical Processor ID: 0 [ 0.000638] mce: CPU supports 9 MCE banks [ 0.000737] CPU0: Thermal monitoring enabled (TM1) [ 0.000833] using mwait in idle threads. [ 0.000923] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver. [ 0.001212] ... version: 3 [ 0.001303] ... bit width: 48 [ 0.001393] ... generic registers: 4 [ 0.001484] ... value mask: 0000ffffffffffff [ 0.001575] ... max period: 000000007fffffff [ 0.001667] ... fixed-purpose events: 3 [ 0.001757] ... event mask: 000000070000000f [ 0.001892] ACPI: Core revision 20101013 [ 0.012849] Setting APIC routing to flat [ 0.013264] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.052967] CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping 07 [ 0.171921] NMI watchdog enabled, takes one hw-pmu counter. [ 0.187856] Booting Node 0, Processors #1 [ 0.295783] NMI watchdog enabled, takes one hw-pmu counter. [ 0.307631] #2 [ 0.415497] NMI watchdog enabled, takes one hw-pmu counter. [ 0.427401] #3 [ 0.535273] NMI watchdog enabled, takes one hw-pmu counter. [ 0.547172] #4 [ 0.655080] NMI watchdog enabled, takes one hw-pmu counter. [ 0.666944] #5 [ 0.774813] NMI watchdog enabled, takes one hw-pmu counter. [ 0.786715] #6 [ 0.894632] NMI watchdog enabled, takes one hw-pmu counter. [ 0.906487] #7 Ok. [ 1.014375] NMI watchdog enabled, takes one hw-pmu counter. [ 1.018267] Brought up 8 CPUs [ 1.018357] Total of 8 processors activated (54329.14 BogoMIPS). [ 1.021310] devtmpfs: initialized [ 1.021556] NET: Registered protocol family 16 [ 1.021737] ACPI: bus type pci registered [ 1.021897] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 1.022026] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 1.027713] PCI: Using configuration type 1 for base access [ 1.028971] bio: create slab <bio-0> at 0 [ 1.029566] ACPI: EC: Look up EC in DSDT [ 1.044223] ACPI Warning: Incorrect checksum in table [TAMG] - 0xC9, should be 0xC8 (20101013/tbutils-314) [ 1.045429] ACPI: Interpreter enabled [ 1.045521] ACPI: (supports S0 S3 S4 S5) [ 1.045832] ACPI: Using IOAPIC for interrupt routing [ 1.047204] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 1.047454] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 1.049046] ACPI: No dock devices found. [ 1.049137] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.049313] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 1.049507] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 1.049601] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 1.049694] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.049820] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 1.049947] pci_root PNP0A03:00: host bridge window [mem 0xbd000000-0xfebfffff] [ 1.050080] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600 [ 1.050103] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 1.050119] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.050121] pci 0000:00:01.0: PME# disabled [ 1.050134] pci 0000:00:02.0: [8086:0102] type 0 class 0x000380 [ 1.050141] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit] [ 1.050146] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.050149] pci 0000:00:02.0: reg 20: [io 0xff00-0xff3f] [ 1.050188] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 1.050211] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit] [ 1.050265] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.050268] pci 0000:00:16.0: PME# disabled [ 1.050295] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 1.050313] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff] [ 1.050380] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.050383] pci 0000:00:1a.0: PME# disabled [ 1.050403] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 1.050416] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit] [ 1.050463] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.050466] pci 0000:00:1b.0: PME# disabled [ 1.050482] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 1.050537] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.050540] pci 0000:00:1c.0: PME# disabled [ 1.050562] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 1.050617] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.050620] pci 0000:00:1c.5: PME# disabled [ 1.050638] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604 [ 1.050693] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 1.050696] pci 0000:00:1c.6: PME# disabled [ 1.050715] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604 [ 1.050770] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.050772] pci 0000:00:1c.7: PME# disabled [ 1.050796] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 1.050814] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff] [ 1.050879] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.050883] pci 0000:00:1d.0: PME# disabled [ 1.050902] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601 [ 1.051005] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106 [ 1.051020] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07] [ 1.051026] pci 0000:00:1f.2: reg 14: [io 0xfd00-0xfd03] [ 1.051033] pci 0000:00:1f.2: reg 18: [io 0xfc00-0xfc07] [ 1.051039] pci 0000:00:1f.2: reg 1c: [io 0xfb00-0xfb03] [ 1.051045] pci 0000:00:1f.2: reg 20: [io 0xfa00-0xfa1f] [ 1.051052] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff] [ 1.051079] pci 0000:00:1f.2: PME# supported from D3hot [ 1.051081] pci 0000:00:1f.2: PME# disabled [ 1.051094] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 1.051107] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit] [ 1.051125] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 1.051167] pci 0000:01:00.0: [10de:0622] type 0 class 0x000300 [ 1.051175] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] [ 1.051183] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.051191] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit] [ 1.051196] pci 0000:01:00.0: reg 24: [io 0xcf00-0xcf7f] [ 1.051201] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 1.058195] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.058287] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 1.058289] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 1.058291] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.058347] pci 0000:02:00.0: [10de:0393] type 0 class 0x000300 [ 1.058363] pci 0000:02:00.0: reg 10: [mem 0xf8000000-0xf8ffffff] [ 1.058380] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.058398] pci 0000:02:00.0: reg 1c: [mem 0xf9000000-0xf9ffffff 64bit] [ 1.058409] pci 0000:02:00.0: reg 24: [io 0xbf00-0xbf7f] [ 1.058420] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.058471] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.058608] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.058701] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff] [ 1.058704] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfaffffff] [ 1.058709] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.058766] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 1.058784] pci 0000:03:00.0: reg 10: [io 0xee00-0xeeff] [ 1.058816] pci 0000:03:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref] [ 1.058836] pci 0000:03:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref] [ 1.058892] pci 0000:03:00.0: supports D1 D2 [ 1.058893] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.058897] pci 0000:03:00.0: PME# disabled [ 1.066186] pci 0000:00:1c.5: PCI bridge to [bus 03-03] [ 1.066280] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 1.066283] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.066288] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 1.066349] pci 0000:04:00.0: [1283:8892] type 1 class 0x000604 [ 1.066472] pci 0000:04:00.0: supports D1 D2 [ 1.066473] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.066479] pci 0000:04:00.0: PME# disabled [ 1.066501] pci 0000:00:1c.6: PCI bridge to [bus 04-05] (subtractive decode) [ 1.066596] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 1.066599] pci 0000:00:1c.6: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.066604] pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 1.066605] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.066607] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.066608] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.066609] pci 0000:00:1c.6: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 1.066610] pci 0000:00:1c.6: bridge window [mem 0xbd000000-0xfebfffff] (subtractive decode) [ 1.066687] pci 0000:05:00.0: [1103:0004] type 0 class 0x000180 [ 1.066714] pci 0000:05:00.0: reg 10: [io 0xdf00-0xdf07] [ 1.066733] pci 0000:05:00.0: reg 14: [io 0xde00-0xde03] [ 1.066751] pci 0000:05:00.0: reg 18: [io 0xdd00-0xdd07] [ 1.066770] pci 0000:05:00.0: reg 1c: [io 0xdc00-0xdc03] [ 1.066789] pci 0000:05:00.0: reg 20: [io 0xda00-0xdaff] [ 1.066826] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.066867] pci 0000:05:01.0: [1186:4b01] type 0 class 0x000200 [ 1.066907] pci 0000:05:01.0: reg 10: [mem 0xfbcf8000-0xfbcfbfff] [ 1.066926] pci 0000:05:01.0: reg 14: [io 0xd800-0xd8ff] [ 1.067016] pci 0000:05:01.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.067064] pci 0000:05:01.0: supports D1 D2 [ 1.067065] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.067071] pci 0000:05:01.0: PME# disabled [ 1.067096] pci 0000:05:02.0: [109e:036e] type 0 class 0x000400 [ 1.067123] pci 0000:05:02.0: reg 10: [mem 0xfbbff000-0xfbbfffff pref] [ 1.067256] pci 0000:05:02.1: [109e:0878] type 0 class 0x000480 [ 1.067282] pci 0000:05:02.1: reg 10: [mem 0xfbbfe000-0xfbbfefff pref] [ 1.067439] pci 0000:05:03.0: [104c:8024] type 0 class 0x000c00 [ 1.067474] pci 0000:05:03.0: reg 10: [mem 0xfbcff000-0xfbcff7ff] [ 1.067493] pci 0000:05:03.0: reg 14: [mem 0xfbcf4000-0xfbcf7fff] [ 1.067621] pci 0000:05:03.0: supports D1 D2 [ 1.067622] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot [ 1.067628] pci 0000:05:03.0: PME# disabled [ 1.067712] pci 0000:04:00.0: PCI bridge to [bus 05-05] (subtractive decode) [ 1.067815] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff] [ 1.067821] pci 0000:04:00.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.067831] pci 0000:04:00.0: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 1.067832] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode) [ 1.067834] pci 0000:04:00.0: bridge window [mem 0xfbc00000-0xfbcfffff] (subtractive decode) [ 1.067835] pci 0000:04:00.0: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] (subtractive decode) [ 1.067837] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 1.067838] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.067839] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.067841] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.067842] pci 0000:04:00.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 1.067843] pci 0000:04:00.0: bridge window [mem 0xbd000000-0xfebfffff] (subtractive decode) [ 1.067916] pci 0000:06:00.0: [1033:0194] type 0 class 0x000c03 [ 1.067940] pci 0000:06:00.0: reg 10: [mem 0xfbefe000-0xfbefffff 64bit] [ 1.068040] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.068044] pci 0000:06:00.0: PME# disabled [ 1.074170] pci 0000:00:1c.7: PCI bridge to [bus 06-06] [ 1.074264] pci 0000:00:1c.7: bridge window [io 0xf000-0x0000] (disabled) [ 1.074267] pci 0000:00:1c.7: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.074273] pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.074291] pci_bus 0000:00: on NUMA node 0 [ 1.074293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.074364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 1.074382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.074403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 1.074419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] [ 1.074435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT] [ 1.078360] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 1.079907] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 1.080755] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 1.081602] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 1.082453] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 1.083409] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 1.084365] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 1.085213] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 1.086055] HEST: Table is not found! [ 1.086197] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.086328] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none [ 1.086457] vgaarb: loaded [ 1.086619] SCSI subsystem initialized [ 1.086746] libata version 3.00 loaded. [ 1.086794] PCI: Using ACPI for IRQ routing [ 1.086885] PCI: pci_cache_line_size set to 64 bytes [ 1.086968] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 1.086969] reserve RAM buffer: 00000000bcfd0000 - 00000000bfffffff [ 1.086970] reserve RAM buffer: 000000023fe00000 - 000000023fffffff [ 1.087032] NET: Registered protocol family 8 [ 1.087123] NET: Registered protocol family 20 [ 1.087235] Switching to clocksource tsc [ 1.087348] pnp: PnP ACPI init [ 1.087443] ACPI: bus type pnp registered [ 1.087587] pnp 00:00: [bus 00-3f] [ 1.087589] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.087590] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.087591] pnp 00:00: [io 0x0d00-0xffff window] [ 1.087592] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.087593] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 1.087594] pnp 00:00: [mem 0xbd000000-0xfebfffff window] [ 1.087624] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.087667] pnp 00:01: [io 0x0010-0x001f] [ 1.087668] pnp 00:01: [io 0x0022-0x003f] [ 1.087669] pnp 00:01: [io 0x0044-0x005f] [ 1.087670] pnp 00:01: [io 0x0062-0x0063] [ 1.087671] pnp 00:01: [io 0x0065-0x006f] [ 1.087672] pnp 00:01: [io 0x0074-0x007f] [ 1.087673] pnp 00:01: [io 0x0091-0x0093] [ 1.087674] pnp 00:01: [io 0x00a2-0x00bf] [ 1.087674] pnp 00:01: [io 0x00e0-0x00ef] [ 1.087675] pnp 00:01: [io 0x04d0-0x04d1] [ 1.087676] pnp 00:01: [io 0x0290-0x029f] [ 1.087677] pnp 00:01: [io 0x0800-0x087f] [ 1.087678] pnp 00:01: [io 0x0290-0x0294] [ 1.087679] pnp 00:01: [io 0x0880-0x088f] [ 1.087713] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.087719] pnp 00:02: [dma 4] [ 1.087720] pnp 00:02: [io 0x0000-0x000f] [ 1.087721] pnp 00:02: [io 0x0080-0x0090] [ 1.087722] pnp 00:02: [io 0x0094-0x009f] [ 1.087723] pnp 00:02: [io 0x00c0-0x00df] [ 1.087744] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.087777] pnp 00:03: [irq 0 disabled] [ 1.087781] pnp 00:03: [irq 8] [ 1.087782] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 1.087804] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.087822] pnp 00:04: [io 0x0070-0x0073] [ 1.087844] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.087849] pnp 00:05: [io 0x0061] [ 1.087869] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.087874] pnp 00:06: [io 0x00f0-0x00ff] [ 1.087877] pnp 00:06: [irq 13] [ 1.087898] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.087994] pnp 00:07: [io 0x03f0-0x03f5] [ 1.087995] pnp 00:07: [io 0x03f7] [ 1.087998] pnp 00:07: [irq 6] [ 1.087999] pnp 00:07: [dma 2] [ 1.088028] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.088167] pnp 00:08: [io 0x03f8-0x03ff] [ 1.088170] pnp 00:08: [irq 4] [ 1.088206] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.088227] pnp 00:09: [io 0x0060] [ 1.088227] pnp 00:09: [io 0x0064] [ 1.088230] pnp 00:09: [irq 1] [ 1.088253] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.088272] pnp 00:0a: [io 0x0400-0x04cf] [ 1.088273] pnp 00:0a: [io 0x04d2-0x04ff] [ 1.088304] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.088310] pnp 00:0b: [io 0x1000-0x107f] [ 1.088311] pnp 00:0b: [io 0x1080-0x10ff] [ 1.088312] pnp 00:0b: [io 0x1100-0x117f] [ 1.088313] pnp 00:0b: [io 0x1180-0x11ff] [ 1.088343] pnp 00:0b: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active) [ 1.088449] pnp 00:0c: [io 0x0454-0x0457] [ 1.088484] pnp 00:0c: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.088496] pnp 00:0d: [mem 0xf0000000-0xf3ffffff] [ 1.088530] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.088692] pnp 00:0e: [mem 0x000d0a00-0x000d3fff] [ 1.088693] pnp 00:0e: [mem 0x000f0000-0x000f7fff] [ 1.088694] pnp 00:0e: [mem 0x000f8000-0x000fbfff] [ 1.088695] pnp 00:0e: [mem 0x000fc000-0x000fffff] [ 1.088696] pnp 00:0e: [mem 0xbcfd0000-0xbcfdffff] [ 1.088697] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 1.088698] pnp 00:0e: [mem 0x00100000-0xbcfcffff] [ 1.088699] pnp 00:0e: [mem 0xbcfe0000-0xbcffffff] [ 1.088700] pnp 00:0e: [mem 0xfec00000-0xfec00fff] [ 1.088701] pnp 00:0e: [mem 0xfed10000-0xfed1dfff] [ 1.088702] pnp 00:0e: [mem 0xfed20000-0xfed8ffff] [ 1.088703] pnp 00:0e: [mem 0xfee00000-0xfee00fff] [ 1.088704] pnp 00:0e: [mem 0xffb00000-0xffb7ffff] [ 1.088705] pnp 00:0e: [mem 0xfff00000-0xffffffff] [ 1.088706] pnp 00:0e: [mem 0x000e0000-0x000effff] [ 1.088707] pnp 00:0e: [mem 0x20000000-0x201fffff] [ 1.088708] pnp 00:0e: [mem 0x40000000-0x400fffff] [ 1.088754] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.088766] pnp 00:0f: [mem 0xffb80000-0xffbfffff] [ 1.088792] pnp 00:0f: Plug and Play ACPI device, IDs INT0800 (active) [ 1.088796] pnp: PnP ACPI: found 16 devices [ 1.088887] ACPI: ACPI bus type pnp unregistered [ 1.088981] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 1.089074] system 00:01: [io 0x0290-0x029f] has been reserved [ 1.089166] system 00:01: [io 0x0800-0x087f] has been reserved [ 1.089258] system 00:01: [io 0x0290-0x0294] has been reserved [ 1.089351] system 00:01: [io 0x0880-0x088f] has been reserved [ 1.089445] system 00:0a: [io 0x0400-0x04cf] has been reserved [ 1.089538] system 00:0a: [io 0x04d2-0x04ff] has been reserved [ 1.089632] system 00:0b: [io 0x1000-0x107f] has been reserved [ 1.089724] system 00:0b: [io 0x1080-0x10ff] has been reserved [ 1.089817] system 00:0b: [io 0x1100-0x117f] has been reserved [ 1.089909] system 00:0b: [io 0x1180-0x11ff] has been reserved [ 1.090003] system 00:0c: [io 0x0454-0x0457] has been reserved [ 1.090097] system 00:0d: [mem 0xf0000000-0xf3ffffff] has been reserved [ 1.090194] system 00:0e: [mem 0x000d0a00-0x000d3fff] has been reserved [ 1.090288] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved [ 1.090381] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved [ 1.090474] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved [ 1.090568] system 00:0e: [mem 0xbcfd0000-0xbcfdffff] could not be reserved [ 1.090661] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.090755] system 00:0e: [mem 0x00100000-0xbcfcffff] could not be reserved [ 1.090849] system 00:0e: [mem 0xbcfe0000-0xbcffffff] has been reserved [ 1.090942] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.091036] system 00:0e: [mem 0xfed10000-0xfed1dfff] has been reserved [ 1.091129] system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved [ 1.091222] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.091316] system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved [ 1.091409] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved [ 1.091502] system 00:0e: [mem 0x000e0000-0x000effff] has been reserved [ 1.091595] system 00:0e: [mem 0x20000000-0x201fffff] could not be reserved [ 1.091689] system 00:0e: [mem 0x40000000-0x400fffff] could not be reserved [ 1.097682] pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf707ffff pref] [ 1.097809] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.097901] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 1.097995] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 1.098089] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.098219] pci 0000:02:00.0: BAR 6: assigned [mem 0xfa000000-0xfa01ffff pref] [ 1.098346] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.098438] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff] [ 1.098534] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfaffffff] [ 1.098629] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.098760] pci 0000:00:1c.5: PCI bridge to [bus 03-03] [ 1.098852] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 1.098947] pci 0000:00:1c.5: bridge window [mem disabled] [ 1.099040] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 1.099172] pci 0000:05:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb1ffff pref] [ 1.099300] pci 0000:05:01.0: BAR 6: assigned [mem 0xfbb20000-0xfbb3ffff pref] [ 1.099426] pci 0000:04:00.0: PCI bridge to [bus 05-05] [ 1.099520] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff] [ 1.099619] pci 0000:04:00.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.099717] pci 0000:04:00.0: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 1.099853] pci 0000:00:1c.6: PCI bridge to [bus 04-05] [ 1.099946] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 1.100041] pci 0000:00:1c.6: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.100136] pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 1.100267] pci 0000:00:1c.7: PCI bridge to [bus 06-06] [ 1.100359] pci 0000:00:1c.7: bridge window [io disabled] [ 1.100454] pci 0000:00:1c.7: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.100549] pci 0000:00:1c.7: bridge window [mem pref disabled] [ 1.100650] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.100744] pci 0000:00:01.0: setting latency timer to 64 [ 1.100747] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.100842] pci 0000:00:1c.0: setting latency timer to 64 [ 1.100847] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.100942] pci 0000:00:1c.5: setting latency timer to 64 [ 1.100947] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.101042] pci 0000:00:1c.6: setting latency timer to 64 [ 1.101049] pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.101147] pci 0000:04:00.0: setting latency timer to 64 [ 1.101153] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.101249] pci 0000:00:1c.7: setting latency timer to 64 [ 1.101251] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.101252] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.101253] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.101254] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 1.101255] pci_bus 0000:00: resource 8 [mem 0xbd000000-0xfebfffff] [ 1.101257] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 1.101258] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff] [ 1.101259] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.101260] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 1.101261] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfaffffff] [ 1.101262] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.101263] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 1.101264] pci_bus 0000:03: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 1.101266] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 1.101267] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 1.101268] pci_bus 0000:04: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 1.101269] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 1.101270] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 1.101271] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 1.101272] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 1.101273] pci_bus 0000:04: resource 8 [mem 0xbd000000-0xfebfffff] [ 1.101275] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 1.101276] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 1.101277] pci_bus 0000:05: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 1.101278] pci_bus 0000:05: resource 4 [io 0xd000-0xdfff] [ 1.101279] pci_bus 0000:05: resource 5 [mem 0xfbc00000-0xfbcfffff] [ 1.101280] pci_bus 0000:05: resource 6 [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 1.101281] pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7] [ 1.101283] pci_bus 0000:05: resource 9 [io 0x0d00-0xffff] [ 1.101284] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff] [ 1.101285] pci_bus 0000:05: resource 11 [mem 0x000c0000-0x000dffff] [ 1.101286] pci_bus 0000:05: resource 12 [mem 0xbd000000-0xfebfffff] [ 1.101287] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff] [ 1.101310] NET: Registered protocol family 2 [ 1.101424] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.101681] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.102208] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.102402] TCP: Hash tables configured (established 262144 bind 65536) [ 1.102496] TCP reno registered [ 1.102586] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.102695] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.102850] NET: Registered protocol family 1 [ 1.102987] RPC: Registered udp transport module. [ 1.103078] RPC: Registered tcp transport module. [ 1.103169] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.134064] pci 0000:01:00.0: Boot video device [ 1.134122] PCI: CLS 4 bytes, default 64 [ 1.134132] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.134226] Placing 64MB software IO TLB between ffff8800b8000000 - ffff8800bc000000 [ 1.134353] software IO TLB at phys 0xb8000000 - 0xbc000000 [ 1.135456] VFS: Disk quotas dquot_6.5.2 [ 1.135558] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.135748] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.135910] msgmni has been set to 15890 [ 1.136103] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 1.136230] io scheduler noop registered [ 1.136321] io scheduler deadline registered [ 1.136420] io scheduler cfq registered (default) [ 1.136620] intel_idle: MWAIT substates: 0x1120 [ 1.136621] intel_idle: v0.4 model 0x2A [ 1.136622] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.136762] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.136891] ACPI: Power Button [PWRB] [ 1.137023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.137150] ACPI: Power Button [PWRF] [ 1.137271] ACPI: acpi_idle yielding to intel_idle [ 1.138749] ERST: Table is not found! [ 1.153279] Linux agpgart interface v0.103 [ 1.153423] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.153572] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.154782] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.178224] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.178419] Floppy drive(s): fd0 is unknown type 13 (usb?) [ 1.198038] FDC 0 is a post-1991 82077 [ 1.199936] brd: module loaded [ 1.200084] ahci 0000:00:1f.2: version 3.0 [ 1.200093] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.200215] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 1.200233] ahci: SSS flag set, parallel bus scan disabled [ 1.213996] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.214125] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst [ 1.214255] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.229863] Switched to NOHz mode on CPU #0 [ 1.229935] Switched to NOHz mode on CPU #2 [ 1.229937] Switched to NOHz mode on CPU #5 [ 1.229939] Switched to NOHz mode on CPU #3 [ 1.229955] Switched to NOHz mode on CPU #7 [ 1.229979] Switched to NOHz mode on CPU #4 [ 1.229985] Switched to NOHz mode on CPU #6 [ 1.229989] Switched to NOHz mode on CPU #1 [ 1.255411] scsi0 : ahci [ 1.255554] scsi1 : ahci [ 1.255684] scsi2 : ahci [ 1.255812] scsi3 : ahci [ 1.255941] scsi4 : ahci [ 1.256069] scsi5 : ahci [ 1.256243] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 40 [ 1.256371] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 40 [ 1.256498] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 40 [ 1.256626] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 40 [ 1.256754] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 40 [ 1.256881] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 40 [ 1.257132] skge 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.257293] skge: 1.13 addr 0xfbcf8000 irq 19 chip Yukon-Lite rev 9 [ 1.279169] skge 0000:05:01.0: eth0: addr 00:26:5a:7b:c1:d4 [ 1.280018] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.280110] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.280351] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.280513] mice: PS/2 mouse device common for all mice [ 1.280978] cpuidle: using governor ladder [ 1.281708] cpuidle: using governor menu [ 1.281872] TCP cubic registered [ 1.281962] Initializing XFRM netlink socket [ 1.282107] Registering the dns_resolver key type [ 1.300532] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.746152] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.799301] ata1.00: ATA-8: OCZ-AGILITY2 3.5, 1.11, max UDMA/133 [ 1.799403] ata1.00: 175836528 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.849121] ata1.00: configured for UDMA/133 [ 1.849332] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY2 3.5 1.11 PQ: 0 ANSI: 5 [ 1.850117] sd 0:0:0:0: [sda] 175836528 512-byte logical blocks: (90.0 GB/83.8 GiB) [ 1.850366] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.850369] sd 0:0:0:0: [sda] Write Protect is off [ 1.850370] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.850377] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.851239] sda: unknown partition table [ 1.851583] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.748333] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.749904] ata2.00: ATA-8: ST31000333AS, SD1B, max UDMA/133 [ 2.750006] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.751859] ata2.00: configured for UDMA/133 [ 2.752134] scsi 1:0:0:0: Direct-Access ATA ST31000333AS SD1B PQ: 0 ANSI: 5 [ 2.752847] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.753023] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.753030] sd 1:0:0:0: [sdb] Write Protect is off [ 2.753031] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.753038] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.834665] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 > [ 2.836319] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.071755] ata3: SATA link down (SStatus 0 SControl 300) [ 3.966122] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.981884] ata4.00: ATA-8: WDC WD10EARS-003BB1, 80.00A80, max UDMA/133 [ 3.981987] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.984389] ata4.00: configured for UDMA/133 [ 3.984562] scsi 3:0:0:0: Direct-Access ATA WDC WD10EARS-003 80.0 PQ: 0 ANSI: 5 [ 3.985225] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.985483] sd 3:0:0:0: [sdc] Write Protect is off [ 3.985555] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 3.985776] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.985800] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.994993] sdc: sdc1 [ 3.995453] sd 3:0:0:0: [sdc] Attached SCSI disk [ 4.876469] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.891587] ata5.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 4.891690] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.892815] ata5.00: configured for UDMA/133 [ 4.892979] scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 4.893660] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.893858] sd 4:0:0:0: [sdd] Write Protect is off [ 4.893986] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.893998] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.894042] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 4.900226] sdd: sdd1 [ 4.900527] sd 4:0:0:0: [sdd] Attached SCSI disk [ 5.211871] ata6: SATA link down (SStatus 0 SControl 300) [ 5.212758] BIOS EDD facility v0.16 2004-Jun-25, 5 devices found [ 5.213718] EXT3-fs (sda): error: couldn't mount because of unsupported optional features (240) [ 5.214218] EXT2-fs (sda): error: couldn't mount because of unsupported optional features (240) [ 5.216095] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null) [ 5.216333] VFS: Mounted root (ext4 filesystem) readonly on device 8:0. [ 5.217242] devtmpfs: mounted [ 5.217337] Freeing unused kernel memory: 436k freed [ 5.340975] udev[1316]: starting version 164 [ 5.395931] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.396043] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.396183] r8169 0000:03:00.0: setting latency timer to 64 [ 5.396189] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default [ 5.396375] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 5.398307] rtc_cmos 00:04: RTC can wake from S4 [ 5.398549] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.400201] pata_hpt366 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.400342] pata_hpt366 0000:05:00.0: PCI INT A disabled [ 5.405177] usbcore: registered new interface driver usbfs [ 5.405295] usbcore: registered new interface driver hub [ 5.405427] usbcore: registered new device driver usb [ 5.410176] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.410290] ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.410407] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.410410] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 5.410517] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.411932] udev[1332]: renamed network interface eth0 to eth5 [ 5.412028] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 5.412150] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 5.412193] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc9000007e000, 1c:6f:65:28:38:c5, XID 0c200000 IRQ 41 [ 5.415116] pata_hpt37x 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.415266] pata_hpt37x: BIOS has not set timing clocks. [ 5.417595] pata_hpt37x: HPT370 using 33MHz bus clock. [ 5.418771] scsi6 : pata_hpt37x [ 5.418908] scsi7 : pata_hpt37x [ 5.419098] ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xda00 irq 18 [ 5.419193] ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xda08 irq 18 [ 5.419272] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 5.419461] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.420943] ehci_hcd 0000:00:1a.0: debug port 2 [ 5.424925] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported [ 5.424931] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000 [ 5.439737] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.439847] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.440011] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.440873] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.441013] usb usb1: Product: EHCI Host Controller [ 5.441107] usb usb1: Manufacturer: Linux 2.6.37-patagonia ehci_hcd [ 5.441203] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.441431] hub 1-0:1.0: USB hub found [ 5.441526] hub 1-0:1.0: 2 ports detected [ 5.441745] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.441853] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.441856] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 5.441956] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.455757] ehci_hcd 0000:00:1d.0: debug port 2 [ 5.459742] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported [ 5.459756] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000 [ 5.475646] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.475767] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.475860] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.475988] usb usb2: Product: EHCI Host Controller [ 5.476080] usb usb2: Manufacturer: Linux 2.6.37-patagonia ehci_hcd [ 5.476172] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.476323] hub 2-0:1.0: USB hub found [ 5.476415] hub 2-0:1.0: 2 ports detected [ 5.490934] nvidia: module license 'NVIDIA' taints kernel. [ 5.491028] Disabling lock debugging due to kernel taint [ 5.495733] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 5.564119] usbcore: registered new interface driver usbserial [ 5.564221] USB Serial support registered for generic [ 5.564319] usbcore: registered new interface driver usbserial_generic [ 5.564411] usbserial: USB Serial Driver core [ 5.596367] ata7.01: ATAPI: _NEC DVD_RW ND-4571A, 1-01, max UDMA/33 [ 5.612200] ata7.01: configured for UDMA/33 [ 5.614413] scsi 6:0:1:0: CD-ROM _NEC DVD_RW ND-4571A 1-01 PQ: 0 ANSI: 5 [ 5.614658] scsi 6:0:1:0: Attached scsi generic sg4 type 5 [ 5.684149] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.751157] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 5.787445] USB Serial support registered for GSM modem (1-port) [ 5.793195] Uniform Multi-Platform E-IDE driver [ 5.793616] lirc_dev: IR Remote Control driver registered, major 251 [ 5.795115] udev[1334]: renamed network interface eth0 to eth6 [ 5.795776] IR LIRC bridge handler initialized [ 5.806706] Linux video capture interface: v2.00 [ 5.807328] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.807434] nvidia 0000:01:00.0: setting latency timer to 64 [ 5.807450] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 5.807603] vgaarb: transferring owner from PCI:0000:01:00.0 to PCI:0000:02:00.0 [ 5.807929] nvidia 0000:02:00.0: enabling device (0000 -> 0003) [ 5.808088] nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.808186] nvidia 0000:02:00.0: setting latency timer to 64 [ 5.808191] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none [ 5.808477] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.21 Thu Nov 4 21:16:27 PDT 2010 [ 5.810358] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.810486] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.810738] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 5.814763] bttv: driver version 0.9.18 loaded [ 5.814862] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 5.815125] bttv: Bt8xx card found (0). [ 5.815224] bttv 0000:05:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.815392] bttv0: Bt878 (rev 2) at 0000:05:02.0, irq: 16, latency: 32, mmio: 0xfbbff000 [ 5.815680] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 5.815842] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 5.816035] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] [ 5.818528] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 5.845959] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.846270] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 5.846295] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.869031] tveeprom 1-0050: Hauppauge model 61316, rev B2M , serial# 3189487 [ 5.869125] tveeprom 1-0050: tuner model is Philips FI1216MF MK2 (idx 9, type 3) [ 5.869252] tveeprom 1-0050: TV standards PAL(B/G) SECAM(L/L') (eeprom 0x24) [ 5.869346] tveeprom 1-0050: audio processor is MSP3415 (idx 6) [ 5.869438] tveeprom 1-0050: has no radio [ 5.869528] bttv0: Hauppauge eeprom indicates model#61316 [ 5.869621] bttv0: tuner type=3 [ 5.883339] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 5.883492] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.883869] hub 1-1:1.0: USB hub found [ 5.884213] hub 1-1:1.0: 6 ports detected [ 5.891943] msp3400 1-0040: MSP3410D-B4 found @ 0x80 (bt878 #0 [sw]) [ 5.892036] msp3400 1-0040: msp3400 supports nicam, mode is autodetect [ 5.904480] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 5.904987] tuner-simple 1-0061: creating new instance [ 5.905079] tuner-simple 1-0061: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)) [ 5.906223] bttv0: registered device video0 [ 5.906336] bttv0: registered device vbi0 [ 5.911256] bttv0: PLL: 28636363 => 35468950 .. ok [ 5.953511] Bt87x 0000:05:02.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.953716] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 5.994743] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 5.994847] firewire_core: created device fw0: GUID 00bdc33d006cf049, S400 [ 6.126872] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 6.126968] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.127273] hub 2-1:1.0: USB hub found [ 6.127495] hub 2-1:1.0: 8 ports detected [ 6.128875] usbcore: registered new interface driver option [ 6.128969] option: v0.7.2:USB Driver for GSM modems [ 6.198488] usb 1-1.5: new high speed USB device using ehci_hcd and address 3 [ 6.290730] usb 1-1.5: New USB device found, idVendor=0409, idProduct=0050 [ 6.290834] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.291213] hub 1-1.5:1.0: USB hub found [ 6.291467] hub 1-1.5:1.0: 7 ports detected [ 6.391950] hda_codec: ALC892: BIOS auto-probing. [ 6.398111] usb 2-1.1: new high speed USB device using ehci_hcd and address 3 [ 6.399407] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3 [ 6.491973] usb 2-1.1: New USB device found, idVendor=13fe, idProduct=3123 [ 6.492077] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.492219] usb 2-1.1: Product: STORE N GO [ 6.492310] usb 2-1.1: Manufacturer: Verbatim [ 6.492401] usb 2-1.1: SerialNumber: 078B088A10B9 [ 6.495412] usb 2-1.1: selecting invalid altsetting 1 [ 6.495520] usbcore: registered new interface driver uas [ 6.498117] Initializing USB Mass Storage driver... [ 6.498417] scsi8 : usb-storage 2-1.1:1.0 [ 6.498611] usbcore: registered new interface driver usb-storage [ 6.498715] USB Mass Storage support registered. [ 6.537249] Adding 7823616k swap on /dev/sdb1. Priority:-1 extents:1 across:7823616k [ 6.543882] EXT4-fs (sda): re-mounted. Opts: (null) [ 6.581857] usb 1-1.5.1: new full speed USB device using ehci_hcd and address 4 [ 6.671184] EXT4-fs (sda): warning: maximal mount count reached, running e2fsck is recommended [ 6.671460] EXT4-fs (sda): re-mounted. Opts: errors=remount-ro,discard,errors=remount-ro,discard [ 6.691303] usb 1-1.5.1: New USB device found, idVendor=04b8, idProduct=010b [ 6.691418] usb 1-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.691565] usb 1-1.5.1: Product: Perfection1240 [ 6.691686] usb 1-1.5.1: Manufacturer: EPSON [ 6.724103] coretemp coretemp.0: TjMax is 99 C. [ 6.724241] coretemp coretemp.1: TjMax is 99 C. [ 6.724402] coretemp coretemp.2: TjMax is 99 C. [ 6.724513] coretemp coretemp.3: TjMax is 99 C. [ 6.777518] usb 1-1.5.2: new high speed USB device using ehci_hcd and address 5 [ 6.915878] usb 1-1.5.2: New USB device found, idVendor=0471, idProduct=0331 [ 6.915985] usb 1-1.5.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 6.916115] usb 1-1.5.2: Product: Philips SPC 1300NC Webcam [ 6.916208] usb 1-1.5.2: Manufacturer: Philips CE [ 6.924503] uvcvideo: Found UVC 1.00 device Philips SPC 1300NC Webcam (0471:0331) [ 6.931156] input: Philips SPC 1300NC Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input4 [ 6.931321] usbcore: registered new interface driver uvcvideo [ 6.931416] USB Video Class driver (v1.0.0) [ 6.958299] 5:3:1: cannot get freq at ep 0x84 [ 6.966495] usbcore: registered new interface driver snd-usb-audio [ 7.005088] usb 1-1.5.4: new full speed USB device using ehci_hcd and address 6 [ 7.114003] usb 1-1.5.4: New USB device found, idVendor=413c, idProduct=1003 [ 7.114099] usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.114228] usb 1-1.5.4: Product: Dell USB Keyboard Hub [ 7.114321] usb 1-1.5.4: Manufacturer: Dell [ 7.115139] hub 1-1.5.4:1.0: USB hub found [ 7.115375] hub 1-1.5.4:1.0: 3 ports detected [ 7.200755] usb 1-1.5.7: new low speed USB device using ehci_hcd and address 7 [ 7.313628] usb 1-1.5.7: New USB device found, idVendor=046d, idProduct=c408 [ 7.313729] usb 1-1.5.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.313860] usb 1-1.5.7: Product: USB Trackball [ 7.313953] usb 1-1.5.7: Manufacturer: Logitech [ 7.323222] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.7/1-1.5.7:1.0/input/input5 [ 7.323451] generic-usb 0003:046D:C408.0001: input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1a.0-1.5.7/input0 [ 7.323597] usbcore: registered new interface driver usbhid [ 7.323696] usbhid: USB HID core driver [ 7.388391] usb 1-1.5.4.1: new full speed USB device using ehci_hcd and address 8 [ 7.485319] usb 1-1.5.4.1: New USB device found, idVendor=413c, idProduct=2010 [ 7.485464] usb 1-1.5.4.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 7.485596] usb 1-1.5.4.1: Product: Dell USB Keyboard [ 7.485690] usb 1-1.5.4.1: Manufacturer: Dell [ 7.496590] scsi 8:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS [ 7.496944] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 7.498538] sd 8:0:0:0: [sde] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 7.500136] sd 8:0:0:0: [sde] Write Protect is off [ 7.500242] sd 8:0:0:0: [sde] Mode Sense: 23 00 00 00 [ 7.500245] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 7.516155] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4.1/1-1.5.4.1:1.0/input/input6 [ 7.516341] generic-usb 0003:413C:2010.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.5.4.1/input0 [ 7.518170] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4.1/1-1.5.4.1:1.1/input/input7 [ 7.518346] generic-usb 0003:413C:2010.0003: input: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.5.4.1/input1 [ 7.596128] usb 1-1.5.4.3: new low speed USB device using ehci_hcd and address 9 [ 7.694068] usb 1-1.5.4.3: New USB device found, idVendor=045e, idProduct=0084 [ 7.694206] usb 1-1.5.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.694347] usb 1-1.5.4.3: Product: Basic Optical Mouse [ 7.694439] usb 1-1.5.4.3: Manufacturer: Microsoft [ 7.697327] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4.3/1-1.5.4.3:1.0/input/input8 [ 7.697501] generic-usb 0003:045E:0084.0004: input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-1.5.4.3/input0 [ 8.156943] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 8.157728] sde: sde1 [ 8.159027] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 8.159133] sd 8:0:0:0: [sde] Attached SCSI removable disk [ 10.842099] fuse init (API version 7.15) [ 11.449831] EXT3-fs: barriers not enabled [ 11.450350] kjournald starting. Commit interval 5 seconds [ 11.450752] EXT3-fs (sdb3): using internal journal [ 11.450977] EXT3-fs (sdb3): mounted filesystem with writeback data mode [ 11.509711] EXT3-fs: barriers not enabled [ 11.510199] kjournald starting. Commit interval 5 seconds [ 11.510813] EXT3-fs (sdb10): using internal journal [ 11.511029] EXT3-fs (sdb10): mounted filesystem with writeback data mode [ 11.561954] EXT3-fs: barriers not enabled [ 11.576407] kjournald starting. Commit interval 5 seconds [ 11.576802] EXT3-fs (sdb7): using internal journal [ 11.577021] EXT3-fs (sdb7): mounted filesystem with writeback data mode [ 11.626933] EXT3-fs: barriers not enabled [ 11.627391] kjournald starting. Commit interval 5 seconds [ 11.627827] EXT3-fs (sdb9): using internal journal [ 11.628026] EXT3-fs (sdb9): mounted filesystem with writeback data mode [ 11.689246] EXT3-fs: barriers not enabled [ 11.689732] kjournald starting. Commit interval 5 seconds [ 11.690141] EXT3-fs (sdb8): using internal journal [ 11.690365] EXT3-fs (sdb8): mounted filesystem with writeback data mode [ 11.701476] EXT3-fs: barriers not enabled [ 11.701944] kjournald starting. Commit interval 5 seconds [ 11.702274] EXT3-fs (sdb5): using internal journal [ 11.702477] EXT3-fs (sdb5): mounted filesystem with writeback data mode [ 11.712718] EXT3-fs: barriers not enabled [ 11.713130] kjournald starting. Commit interval 5 seconds [ 11.713542] EXT3-fs (sdb6): using internal journal [ 11.713742] EXT3-fs (sdb6): mounted filesystem with writeback data mode [ 11.730190] EXT3-fs: barriers not enabled [ 11.750805] kjournald starting. Commit interval 5 seconds [ 11.751300] EXT3-fs (sdd1): using internal journal [ 11.751525] EXT3-fs (sdd1): mounted filesystem with writeback data mode [ 11.787895] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 12.646068] device eth5 entered promiscuous mode [ 12.647147] skge 0000:05:01.0: eth5: enabling interface [ 12.656189] device eth6 entered promiscuous mode [ 12.657413] r8169 0000:03:00.0: eth6: link up [ 12.657520] r8169 0000:03:00.0: eth6: link up [ 12.669301] br0: port 2(eth6) entering listening state [ 12.670117] br0: port 2(eth6) entering listening state [ 12.763906] NET: Registered protocol family 10 [ 12.764192] lo: Disabled Privacy Extensions [ 12.764312] ADDRCONF(NETDEV_UP): eth5: link is not ready [ 14.667539] br0: port 2(eth6) entering learning state [ 16.668013] br0: port 2(eth6) entering forwarding state [ 17.997409] FS-Cache: Loaded [ 18.006396] FS-Cache: Netfs 'nfs' registered for caching [ 18.525396] sshd (2858): /proc/2858/oom_adj is deprecated, please use /proc/2858/oom_score_adj instead. [ 22.935687] br0: no IPv6 routers present [ 23.255107] eth6: no IPv6 routers present